Removing Suspension Springs on 123 and 126 Chassis - Grafco Electric

Introduction

Welcome to Grafco Electric, your trusted source for comprehensive auto maintenance and repair information. In this guide, we will walk you through the process of removing suspension springs on 123 and 126 chassis vehicles. By following our step-by-step instructions, you will be able to efficiently complete this task and ensure smooth suspension performance.

Why Remove Suspension Springs?

Before we dive into the removal process, let's understand why you might need to remove suspension springs on your 123 or 126 chassis vehicle. Over time, these springs can wear out, leading to reduced suspension performance and an uncomfortable ride. By replacing or servicing your suspension springs, you can restore your vehicle's handling and ride quality, ensuring a safer and more enjoyable driving experience.

Tools and Materials Needed

Before getting started, gather the following tools and materials:

• Jack and jack stands
• Spring compressor
• Wrench set
• Safety goggles
• Gloves

Step-by-Step Guide

Step 1: Prepare Your Vehicle

Park your vehicle on a level surface and engage the parking brake. Put on your safety goggles and gloves to protect yourself during the process.

Step 2: Lift the Vehicle

Using the jack, lift the front or rear of the vehicle (depending on which suspension springs you are replacing) and secure it with jack stands. Ensure the vehicle is stable and won't shift during the removal process.

Step 3: Remove the Wheel

Using a wrench, loosen the lug nuts and remove the wheel on the side where you will be working. This will provide better access to the suspension spring and make the removal process easier.

Step 4: Install the Spring Compressor

Attach the spring compressor to the suspension spring. Make sure it is securely in place before proceeding.

Step 5: Compress the Spring

Use the spring compressor to compress the suspension spring, which will relieve tension and allow for safe removal.

Step 6: Remove the Suspension Spring

With the spring compressed, carefully remove all the securing bolts and other components that hold the suspension spring in place. Be cautious as you remove the spring to prevent any sudden release of tension.

Step 7: Install the New Suspension Spring

If you are replacing the suspension spring, carefully position the new spring and secure it using the appropriate components. Ensure everything is tightened to the manufacturer's specifications.

Step 8: Repeat Steps for Remaining Springs (if applicable)

If you are replacing the springs on both sides of the vehicle or addressing the rear suspension, repeat Steps 3 to 7 for the remaining springs. This will ensure overall suspension balance and optimal performance.

Step 9: Reinstall the Wheel

Once all suspension springs have been replaced or serviced, carefully reinstall the wheel and tighten the lug nuts. Ensure they are tightened to the appropriate torque specifications.

Step 10: Lower the Vehicle

Using the jack, carefully lower the vehicle from the jack stands and remove the stands. Make sure the vehicle is resting evenly on the ground before removing the jack.

Conclusion

Congratulations! You have successfully removed and replaced the suspension springs on your 123 or 126 chassis vehicle. By following our detailed guide, you can ensure excellent suspension performance and a comfortable ride. If you encounter any difficulties during the process or require further assistance, don't hesitate to reach out to Grafco Electric, your trusted partner in auto maintenance and repairs.